Husqvarna P524 Workshop Manual page 68

6. Remove the frame section under the driver
seat by removing the 6 screws. In order to lift
away the frame section, the cable retainers
must also be loosened by removing 2 screws.
7. Release pump belt tension.
a
c
b
a. Loosen the 3 screws on the pump belt cradle.
b. Loosen the locking nut on the adjustment
screw.
c. Loosen the adjustment screw for the pump
belt to max.
8. Dismantle the belt pulley for the pump belt on
the left-side of the machine.
9. Remove the SGA clip from the pump.
10. Loosen the pump belt pulley with two screws
from the pump shaft and lift up.
11. Release the linkage from the pump.
12. Remove the protecting cover from the right side
of the machine.
Hydraulic system
English – 67