Husqvarna P524 Workshop Manual page 65

Hydraulic system
Dismantling
1. Remove the tool frame, see "5.7.1 Tool frame"
on page 76.
2. Remove the left wing cover.
3. Raise and support the machine.
64 – English
4. Undo the hydraulic pipes from underneath the
front axle. Fit protective plugs. A small amount of
oil may leak out even if the front axle has been
drained.
5. Undo the hydraulic pipes from the top of the front
axle. Fit protective plugs. A small amount of oil
may leak out even if the front axle has been
drained.