Dräger Caleo Instructions For Use Manual page 35

Compact mounting rail clamp (2M 85 337)
for 38 mm pole
CAUTION !
Maximum load for compact rail clamp is 5 kg (11 lbs).
The compact mounting rail clamp may only be installed by
qualified technical personnel.
For mounting such accessories as:
– O analyzer
2
Adjust height of compact rail clamp to the required height of
the accessories to be installed.
1
To attach compact rail to upright mounting support for
accessories, slide over pole, and
2
secure with screws.
Base-mounted accessory pole (2M 50 680)
CAUTION !
Maximum load for base pole is 10 kg (22 lbs).
Max. distance between loads and pole: 150 mm (6 inches).
The base-mounted accessory pole may only be installed
by qualified technical personnel.
Mount as specified in the Installation Instructions.
For mounting such accessories as:
– additional pole extensions, see page 36,
– swivel table (2M 21 186), see page 34,
– monitor support shelf (2M 50 085), see page 37.
Preparation
Installing Accessories
1
2
35