Dräger Caleo Instructions For Use Manual page 3

How to use these Operating Instructions
The headline ...
specifies the subject of the main chapter
to help you find your way around quickly.
The page body ...
contains instructions for use of the device
in a combination of text and illustrations. The information is
translated directly into sequences of activities showing the user
how to use the device.
The left-hand column ...
contains text
explaining the device and guiding the user directly to its uses
through concise, ergonomically arranged instructions.
Bullet points refer to individual actions.
1
numbers refer both to illustrations and the sequence of
action when several steps are required to complete a task.
The right-hand column ...
contains illustrations
as a visual reference to the text, guiding the user to locate
parts of the unit itself. Elements mentioned in the text are
highlighted. Unnecessary details are omitted. Rendering of
screen displays guide the user and allow to reconfirm actions
performed.
Moving the control unit to the opposite side
for 38 mm pole
1
Loosen clamping screw to remove control unit. (Support
control unit to prevent it from dropping once clamping screw
is loosened.)
2
Loosen clamping screw to remove holder.
Upon delivery, the control unit is attached to the 38 mm dia.
tube of 310 mm length (38/310 pole).
This tube is secured for transport with a screw attachment.
If required, the tube can be detached (recommendation: ask for
assistance from qualified technical personnel):
3
Remove both caps from the tube. Insert a screwdriver into
the holes and release the tube.
To install control unit on the adjacent side:
l
Slide holder over the other pole.
2 Tighten clamping screw to fix holder in position.
l
Set control unit to the desired working height
1
Tighten clamping screw to secure control unit to the holder.
CAUTION !
When mounting control unit to its pole, ensure that there is
sufficient space to swivel the control unit.
(see "Tilting the bed", page 50).
Mounting the control unit on the handle side
CAUTION !
Only qualified technical personnel may move the control unit
from the wall side to handle side or vice versa.
l
Install basic pole (2M 50 680), see page 37.
l
Screw in the extension pole 38/600 (2M 50 691) or pole 38/
310 (2M 50 688).
l
Re-install the control unit as specified in the Assembly
Instructions.
CAUTION !
Do not remove cable to the control unit from the cable guides
on the basic pole.
Make sure there is sufficient space to swivel and tilt the unit.
35
Preparation
Installing Accessories
1
2
3