Dräger Caleo Instructions For Use Manual page 81

Using Humidity Control*
Connect the humidifier system
(see "Using Humidification Systems", page 49).
1
Press key to set humidity control.
The actual value and current setpoint of the humidity control
are displayed as bar graphs and numerical values.
Soft key symbols:
2
= New setpoint has not been activated.
3
off = Humidity OFF
4
manual = Set target value manually.
5
auto = Set target value automatically
(see page 159).
NOTE: Humidity inside the incubator is servo-controlled both
when manually setting a target value and when using AUTO
humidity.
– On activating humidity control, AUTO mode is proposed as
default.
* Available option
D
1
D
2 3 5
4
Operation
Using Humidity Control
81