First Start-Up - Honeywell HVAC400x Applications Manual

Fig. 3. The graphical display for Advanced Commissioning HMI
A. The first status field: STOP/RUN.
B. The rotation direction of the motor.
C. The second status field: READY/NOT READY/FAULT.
D. The alarm field: ALARME/-.
1.3

First Start-Up

The Start-up wizard tells you to provide necessary data for the drive to control your procedure. In the Start-up
wizard, you need these keypad buttons:
LIGHT/RIGHT arrows. Use these to easily move between digits and decimals.
UP/DOWN arrows. Use these to move between options in menu and to change value.
OK
OK button. Confirm selection using this button.
BACK/RESET button. With this button, you can return to the previous question in the Wizard. If you press it at
BACK
RESET the first question, the Startup Wizard is cancelled.
When you have connected power to the drive, follow these instructions to easily set up your drive.
1 Language selection.
2 Daylight saving
3 Temps
4 Date
5 Year
Run Startup wizard? (To set the parameter values manually,
6
select No and press the OK button.)
7 Select a process
A B C
STOP READY
Main Menu
ID:
Quick Setup
( 17 )
Monitor
( 5 )
Parameters
( 12 )
Legend
Table 1. Keypad buttons
9
HVAC400X – APPLICATION MANUAL
D E
F
I/O
M1
G
H
E. The control place field: PC / IO / KEYPAD / FIELDBUS.
The location field: the ID number of the parameter and
F.
the current location in the menu.
G. An activated group or item.
H. The number of items in the group in question.
The selection is different in all the language
packages.
Russia, US, EU, OFF
hh:mm:ss
dd.mm.
Yyyy
Yes
No
Pump, fan
EN2B-0417GE51 R0719