Honeywell HVAC400x Applications Manual page 22

HVAC400X – APPLICATION MANUAL
EDITING THE NUMERICAL VALUES
1. Find the parameter using the arrow buttons.
2. Enter the Edit mode.
3. If the value is numerical, move from digit to digit using the
LEFT and RIGHT arrow buttons. Change the digits using
the UP and DOWN arrow buttons.
4. To accept the change, press the OK button. To ignore the
change, use the BACK/RESET button to return to the level
where you were before.
EN2B-0417GE51 R0719
STOP
Start / Stop Setup
MaxFreqReference
MinFreqReference
STOP
Min: 0.00Hz
Max: 50.00Hz
STOP
Min: 0.00Hz
Max: 50.00Hz
STOP
Min: 0.00Hz
Max: 50.00Hz
22
READY
ID: 101
M3.3.1.1
0.00 Hz
50.00 Hz
PosFreqRefLimit
320.00 Hz
READY
MinFreqReference
ID: 101
M3.3.1.1
0.00Hz
READY
MinFreqReference
ID: 101 M3.3.1.1
00.00Hz
READY
MinFreqReference
ID: 101 M3.3.1.1
11.00Hz
I/O
I/O
I/O
I/O