Honeywell HVAC400x Applications Manual page 114

HVAC400X – APPLICATION MANUAL
P3.5.1.27 MOTOR 2 INTERLOCK (ID 427)
You can use this parameter to select the digital input signal that is used as interlock signal for the Pump and Fan
Cascade system.
P3.5.1.28 MOTOR 3 INTERLOCK (ID 428)
You can use this parameter to select the digital input signal that is used as interlock signal for the Pump and Fan
Cascade system.
P3.5.1.29 MOTOR 4 INTERLOCK (ID 429)
You can use this parameter to select the digital input signal that is used as interlock signal for the Pump and Fan
Cascade system.
P3.5.1.30 MOTOR 5 INTERLOCK (ID 430)
You can use this parameter to select the digital input signal that is used as interlock signal for the Pump and Fan
Cascade system.
P3.5.1.31 MAINTCOUNTER 1 RESET (ID 490)
You can use this parameter to select the digital input that resets the value of Maintenance counter 1.
P3.5.1.32 MAIN COUNTER 2 RESET (ID 491)
You can use this parameter to select the digital input that resets the value of Maintenance counter 2.
P3.5.1.33 MAIN COUNTER 3 RESET 2 (ID 492)
You can use this parameter to select the digital input that resets the value of Maintenance counter 3.
P3.5.1.36 MOTOR POTENTIOMETER UP (ID 418)
You can use this parameter to increase the output frequency with a digital input signal. The motor potentiometer
reference INCREASES until the contact is open.
P3.5.1.37 MOTOR POTENTIOMETER DOWN (ID 417)
You can use this parameter to decrease the output frequency with a digital input signal. The motor potentiometer
reference DECREASES until the contact is open.
P3.5.1.38 FIRE MODE PRESET FREQUENCY SELECTION 0 (ID 15531)
You can use this parameter to select the digital input signal that is used as a selector for fire mode preset
frequencies.
P3.5.1.39 FIRE MODE PRESET FREQUENCY SELECTION 1 (ID 15532)
You can use this parameter to select the digital input signal that is used as a selector for fire mode preset
frequencies.
P3.5.1.40 FIRE MODE ACTIVATION CLOSE (ID 1619)
You can use this parameter to select the digital input signal that activates the Fire Mode function.
P3.5.1.41 FIRE MODE REVERSE (ID 1618)
You can use this parameter to select the digital input signal that gives a command for reverse rotation direction
during the Fire Mode. This function has no effect in normal operation.
EN2B-0417GE51 R0719 114