HVAC400X – APPLICATION MANUAL
PROGRAMMING IN THE GRAPHICAL DISPLAY
1.
Select a parameter. To go into the Edit mode, push the
RIGHT arrow button.
2.
In the Edit mode, the slot value DigIN SlotA is underlined
and blinks. If you have more digital inputs available in your
I/O, e.g., because of option boards in slots C, D or E, make
a selection of them.
3.
To enter into the parameter, press the OK button, which
will then start to blink.
4.
To change the terminal to 6, push the UP arrow button
three times. Accept the change using the OK button.
EN2B-0417GE51 R0719
STOP
STOP
Min:
Max:
STOP
Min:
Max:
STOP
Min:
Max:
110
READY
Digital Inputs
ID: 405
P3.5.1.7
Ext Fault Close
DigINSlotA.3
Ext Fault Open
DigINSlot0.2
Fault Reset Close
DigINSlotA.6
READY
Ext Fault Close
ID: 405
P3.5.1.7
DigIN SlotA.3
READY
Ext Fault Close
ID: 405
P3.5.1.7
DigIN SlotA.3
READY
Ext Fault Close
ID: 405
P3.5.1.7
DigIN SlotA.6
I/O
I/O
I/O
I/O