References; Frequency Reference - Honeywell HVAC400x Applications Manual

HVAC400X – APPLICATION MANUAL
Selection number Selection name
0 A rising edge is necessary
1 State
P3.2.10 KEYPAD STOP BUTTON (ID 114)
You can use this parameter to enable the keypad stop button. When this function is enabled, a press of keypad
stop button always stops the drive (regardless of the control place). When this function is disabled, a press of
keypad stop button stops the drive in local control only.
Selection number Selection name
0 Keypad Stop button Yes
1 Keypad Stop button No
P3.2.11 START DELAY (ID 524)
You can use this parameter to set the delay between the Start command and the actual start of the HVAC drive.
10.3

References

10.3.1

Frequency Reference

P3.3.1 MINIMUM FREQUENCY REFERENCE (ID 101)
You can use this parameter to set the minimum frequency reference.
P3.3.2 MAXIMUM FREQUENCY (ID 102)
You can use this parameter to set the maximum frequency reference.
P3.3.3 I/O CONTROL REFERENCE A SELECTION (ID 117)
You can use this parameter to select the reference source when the control place is I/O A.
P3.3.4 I/O CONTROL REFERENCE B SELECTION (ID 131)
You can use this parameter to select the reference source when the control place is I/O B. You can force the I/O B
control place to be active only with a digital input (P3.5.1.6).
P3.3.5 KEYPAD CONTROL REFERENCE SELECTION (ID 121)
You can use this parameter to select the reference source when the control place is keypad.
P3.3.6 KEYPAD REFERENCE (ID 184)
You can use this parameter to adjust the frequency reference on the keypad. This parameter gives the frequency
reference of the drive when the frequency reference source is 'Keypad Reference'.
P3.3.7 KEYPAD DIRECTION (ID 123)
You can use this parameter to set the rotation direction of the motor when the control place is keypad.
EN2B-0417GE51 R0719
RESTART MODE
Description
Restart after power-off disabled.
Restart after power-off enabled.
DISABLING THE START BUTTON
Description
The keypad Stop button is always enabled.
Limited function of the keypad Stop button.
100