3.2.4.1
Parameters that You Cannot Copy If the Drives Have Different Sizes
If you use the keyboard to copy parameters from one drive to another having a different size, the values of these
parameters will not change.
•
Motor nominal voltage (P3.1.1.1)
•
Motor nominal frequency (P3.1.1.2)
•
Motor nominal speed (P3.1.1.3)
•
Motor nominal current (P3.1.1.4)
•
Motor cos phi (P3.1.1.5)
•
Motor nominal power (P3.1.1.6)
•
Motor current limit (P3.1.1.7)
•
Switching frequency (P3.1.2.1)
•
Zero frequency voltage (P3.1.2.3)
•
Motor preheat current (P3.1.2.4)
•
Stator voltage adjust (P3.1.2.12)
•
Maximum frequency (P3.3.2)
•
Start magnetizing current (P3.4.12)
•
DC brake current (P3.4.14)
•
Flux braking current (P3.4.17)
•
Stall current limit (P3.9.12)
•
Motor thermal time constant (P3.9.9)
3.2.5
Comparing Parameters
With this function, you can compare the current parameter set with one of these four sets.
•
Set 1 (P6.5.4 Save to Set 1)
•
Set 2 (P6.5.6 Save to Set 2)
•
The defaults (P6.5.1 Restore Factory Defaults)
•
The keypad set (P6.5.2 Save to Keypad)
See also Table 64. The parameter compare.
NOTE:
If you have not saved the parameter set with which you want to compare the current set, the display
shows the text Comparing failed.
HVAC400X – APPLICATION MANUAL
29
EN2B-0417GE51 R0719