Honeywell HVAC400x Applications Manual page 36

HVAC400X – APPLICATION MANUAL
Index Monitoring value
V2.2.1 Output frequency
V2.2.2 Frequency reference
V2.2.3 Motor speed
V2.2.4 Motor current
V2.2.5 Motor torque
V2.2.7 Motor shaft power
V2.2.8 Motor shaft power
V2.2.9 Motor voltage
V2.2.10 DC link voltage
V2.2.11 Unit temperature
V2.2.12 Motor temperature
V2.2.13 Analog input 1
V2.2.14 Analog input 2
V2.2.15 Analog output 1
V2.2.16 Motor preheat
V2.2.17 Heating (feeding DC-current)
V2.2.18 LastActiveFaultCode
V2.2.19 Fire mode status
V2.2.20 Appl.StatusWord 1
EN2B-0417GE51 R0719
Table 5. Items in the monitoring menu
Unit ID
Hz 1
Hz 25
rpm 2
A 3
% 4
% 5
KW 73
V 6
V 7
°C/ °F 8
% 9
% 59
% 60
% 81
1228
43
37
1597
89
36
Description
0 = Disabled.
1 = Heating (feeding DC-current).
B1 =Ready.
B2 = Run.
B3 = Fault.
B6 =RunEnable.
B7 = AlarmActive.
B10 = DC Current in stop.
B12 = RunRequest.
B13 = MotorRegulatorActive.
0 = Disabled.
1 = Enabled.
2 = Activated.
3 = Test mode.
B0 = Interlock 1.
B1 = Interlock 2.
B5 = E/S Control Act.
B6 = I/O B Control Act.
B7 = Fieldbus Control Act.
B8 = Local Control Act.
B9 = PC Control Act.
B10 = Preset Frequencies Act.
B12 = FireMode Act.
B13 = PreHeat Act.