To Add A Fax On Demand Mailbox To A Ccr Tree; Adding A Fax On Demand Mailbox To A Ccr Tree - Nortel CallPilot Set Up And Operation Manual

Adding a Fax On Demand mailbox to a CCR Tree

To make a Fax On Demand mailbox accessible from a Custom Call Routing (CCR) Tree, add a
Mailbox node to a CCR Tree. Assign to the Mailbox node the mailbox number of the Fax On
Demand mailbox. This mailbox gives callers single-digit access to a Fax On Demand mailbox.
For more information on CCR Trees, refer to the CallPilot Manager Set Up and Operation Guide.

To add a Fax On Demand mailbox to a CCR Tree

1
Start CallPilot Manager.
2 Click the Custom Call Routing heading.
The CCR Tree Administration page appears.
3
Click the Change link for the Tree you want to add an Information Mailbox to.
The CCR Tree Properties page appears.
4
Click the Mailbox link for the Tree.
The CCR Tree Properties page appears with the Mailbox node.
5 Click the Change link for the Mailbox node.
The CCR Mailbox Node Properties page appears.
6 In the Mailbox box type the mailbox number of the Fax On Demand mailbox.
7 From the Destination list box select where you want callers to go after they access the Fax On
Demand mailbox:
• Previous: returns the caller to the Previous menu
• Home: returns the caller to the Home node Voice Prompt
• Disconnect: disconnects the call
8
Click the Submit button.
The CCR Tree Properties page shows the mailbox is added to the CCR Tree.
9 Click the Close button.
Chapter 3 Setting up Fax On Demand mailboxes
CallPilot Fax Set Up and Operation Guide
39