To Convert An Image To A Custom Cover Page; Creating A Custom Cover Page - Nortel CallPilot Set Up And Operation Manual

Creating a custom cover page

The fax image file you use for a custom fax cover page is:
• a single page that is 8.5 x 11 inches (215 mm x 280 mm)
• a two color (black and white) .tif file, with CCITT Group 3 (1d) Fax Compression with
normal, (not-reversed) bit order
• of two possible image resolutions: 204x98 (normal resolution) or 204x196 (fine resolution)
• blank in the middle third of the page. This area is used by CallPilot for cover page information
such as To: and From:, depending on the type of information being printed on the fax
You can create a custom cover page if you have Imaging for Windows on your computer. On
Windows 98 and Windows NT, Imaging for Windows is sometimes called Wang Imaging. On
Windows Me and Windows 2000, Imaging for Windows is sometimes called Kodak Imaging.

To convert an image to a custom cover page

1 Create or find the image you want to use as a custom fax cover page.
The image can be a .gif, .tif, .jpg, .bmp, or. pcx file.
2 Click the Windows Start button, point to Programs, point to Accessories and click Imaging.
Imaging for Windows appears.
3 Open the graphic you want to use as a cover page.
4 On the File menu click Save As.
The Save As dialog box appears.
5 Select the folder in which you want to create the new image.
6
From the Save as type list box, select TIFF Document (*.tif).
7 Click the Save button.
8
On the Page menu click Properties.
The Page Properties dialog box appears with the Color tab displayed.
9
Click the Black and White option.
10 Click the Compression tab and from the Compression list box select CCITT Group 3 (1d)
Fax.
11 Click the Resolution tab and:
• from the Resolution list box select Custom
• set X: to 204,
• set Y: to 98 for normal resolution, or 196 for fine resolution
Chapter 2 Setting up CallPilot Fax
CallPilot Fax Set Up and Operation Guide
23