Yamaha MO6 Owner's Manual page 68

Editing a Performance
4
Select the file (
Move the cursor to the file (extension: M7A) saved in the operation explained in the previous instructions. If the desired file
was saved in specific folder, enter the folder and select the file. For information on how to select a folder, see page 213.
If you have set the Type parameter to "All" in step 3, go on to step 5.
If you have set the Type parameter to "Performance" in step 3, execute the operations in the following box, then go on to
step 5.
When Type is set to "Performance":
When Type is set to "Performance," you can specify and load a specific Performance from a file (with the extension
M7A).
Move the cursor to the file (extension:
S7A) saved in the operation explained
on the previous page.
CAUTION
Loading data to this instrument automatically erases and replaces any existing data in the User memory.
5
Press the [SF1] EXEC button to actually load the file.
After the data has been loaded, a "Completed" message appears and operation returns to the original display.
CAUTION
While the data is being saved/loaded, make sure to follow these precautions:
• Do not remove or eject the media from the USB storage device.
• Do not unplug or disconnect the USB storage device.
• Do not turn off the power of the instrument or the relevant devices.
68 Owner's Manual
) to be loaded.
ENTER
All the Performances contained in
the selected file are listed on the
display. Move the cursor to the
EXECUTE
desired Performance.
Select the destination
Select the desired
Performance number.
Performance to be
loaded.