Song Record Mode - Yamaha MO6 Owner's Manual

PORT
[SF2] OUT SW (Output Switch)
INT SW (Internal Switch)
EXT SW (External Switch)
[SF3] TR LOOP (Track Loop)
[F5] PHRASE
Specify the source phrase from the Preset Phrases (Dr1 – Dr4)
and the User Phrases in the previously selected Pattern.
Specify the destination track and
measure of the current selected
song.
[F6] CHAIN
This function allows Songs to be "chained" together for automatic sequential playback. For details, refer to the Quick Guide on page 95.
skip ................. Skips past (ignores) the selected chain number and continues playback from the next chain number.
stop ................. Stops Song chain playback at that chain number. You can restart the Song chain playback from the next chain number by pressing the [F] (Play) button.
end .................. Indicates the end mark of the Song chain data.

Song Record mode

Song Record Standby mode
[F1] SETUP
Type (Recording Type)
Quantize
Event
RecTrack
Determines the MIDI transmission port for the corresponding track. Playback data of tracks set to off is output
via MIDI without any Port message.
The internal tone generator parts of this synthesizer can be played back only over Port 1.
Settings: off, 1 – 3
n
Port data can be output only through the USB terminal. No port data is transmitted through the MIDI OUT terminal, even
if the corresponding track is set to a specific port number.
You can also simultaneously set multiple tracks (tracks 1 – 8 or tracks 9 – 16) to the same setting as the
currently selected track, by changing the parameter while holding the [SF2] 1 – 8 button or [SF3] 9 – 16 button.
Determines whether playback data is transmitted to the internal tone generator block or not.
Settings: on, off
Determines whether playback data is output to the external MIDI tone generator via MIDI or not.
Settings: on, off
From this display you can determine whether the data in the selected track loops or not in playback. Using
Loop can be an effective way to repeat short patterns and phrases throughout the Song. For details, see page
193.
Settings: off, on
After completing the settings,
press the [ENTER] button to
execute Copy Phrase.
[SONG]
Determines the recording method. For details on each method, refer to page 138 in the Basic Structure
section.
Settings: When the RecTrack is set to any of 1-16: replace, overdub, punch, step
When the RecTrack is set to tempo: replace, punch, step
When the RecTrack is set to scene: replace, punch
When the RecTrack is set to multi: replace, overdub, punch
n
When "punch" is selected, "Punch-in measure: beat" and "Punch-out measure: beat" appear in the display and should
be set. If you've set the Locate 1 and 2 points (Loc1, Loc2; see page 92), the punch-in/out points can be set with a
single button press. Move the cursor to the punch-in/out value, and notice that a "COPYLOC" menu item appears. Press
the [SF1] COPYLOC button, and the punch-in/out settings are automatically assigned to the existing Locate points.
n
When "step" is selected, you should specify the event type to be entered.
This parameter is available when the Recording Type is set to something other than "step." Record quantize
aligns the timing of notes automatically, as you record.
You can set this parameter also by using the Note Type selection window called up via the [INFORMATION]
button. For details, see page 35.
Settings: off, 60 (32nd note), 80 (16th note triplet), 120 (16th note), 160 (8th note triplet), 240 (8th note), 320 (1/4 note triplet), 480
(1/4 note)
This parameter is available when the Recording Type is set to "step." This lets you specify the event type to be
entered.
Settings: note, p.bend (pitch bend), CC#000 – #119 (Control Change)
Determines the track to be recorded.
Pressing the [F6] button lets you switch between Single Track recording and All Track recording.
Settings: tempo, scene, 1 – 16, multi
Song Record mode
You can copy any of the Preset Phrases (Dr1 – Dr4) and User Phrases in the
previously selected Pattern to the track of the currently selected song.
Song selection [REC]
Song Record Standby mode
Owner's Manual
179