Yamaha MO6 Owner's Manual page 82

Creating a Pattern
TIP Copying a User Phrase from another Pattern to the current Pattern
The User Phrases that can be assigned with the Patch function are limited to the ones contained in the currently
selected Pattern. To copy Phrases from other Patterns for use in the current one, follow the instructions below.
1
In the [F4] PATCH display, press the [SF5] COPY button to call up the Copy Phrase display.
2
First, specify the source Pattern number and Phrase number as well as the destination (current Pattern)
Phrase number and track number. Then, press the [ENTER] button to execute the Copy operation.
3
Press the [EXIT] button to return to the [F4] PATCH display, then check the assigned Phrase by pressing the
[F] (Play) button to play the Pattern.
Next, record Section C by using realtime recording or step recording.
Creating a Pattern with the Realtime and Step Recording methods
For Section C, set the drums, bass and guitar to the same as section A, and then add a piano part using Realtime recording,
and enter a strings part by using Step recording. Here we'll also adjust the rhythmic feel of the phrase by using the Groove
function.
Creating a Pattern with Realtime
recording
Copy Section A to Section C, following the
1
instructions in the section "Copying a
Pattern" on page 81.
Select the track to which the piano part is to
2
be assigned.
Press the [TRACK SELECT] button so that its lamp lights,
and select the track for the piano part by pressing the
Number [4] button.
Press the [REC] button to enter the Pattern
3
Record mode.
Set the parameters related to recording in the [F1] SETUP
display.
Set Type to "overdub" and Loop to "on." These settings let
you repeat the Pattern recording in a "loop" and record
additional note events without deleting already-recorded
data. For the other parameters, see page 198.
82 Owner's Manual
Source
Destination
4 Press the [ F ] (Play) button to start recording.
When the recording is finished, press the
5
[J] (Stop) button to stop recording.
Press the [F] (Play) button to hear your newly recorded
Pattern.