Yamaha MO6 Owner's Manual page 222

Display Messages
LCD Indication
Please stop sequencer.
Power on mode stored
Read only file.
Receiving MIDI bulk
Recording stopped
Scene & Arpeggio type stored
Seq memory full.
System memory crashed.
This performance uses user voices.
Too many favorites
Too many fixed notes
Transmitting MIDI bulk
Unknown file format.
USB connection terminated. Press
[ENTER].
USB device connecting
USB device full.
USB device not ready.
USB device read/write error.
USB device unformatted.
USB device write protected.
USB power consumption exceeded.
USB transmission error
Utility stored
Owner's Manual
222
The operation you've attempted to execute cannot be done during Song/Pattern playback.
The setting of the program number automatically selected when turning the power on has been stored.
You have attempted to delete, rename, or overwrite a read-only file.
The MO is receiving MIDI bulk data.
The recording has been stopped since the memory became full.
The Song Scene and current Arpeggio type have been stored to one of the [SF1] – [SF5] buttons.
The internal memory for Sequence data is full, preventing any further operation (such as recording, editing, Job
execution, MIDI reception/transmission, or loading from the USB storage device). Try again after erasing unwanted
Song, Pattern, or User phrase data.
Writing data to Flash ROM has failed.
The performance you have loaded includes User voice data. Check whether the voice you saved exists at the
appropriate User voice bank.
You've attempted to assign more than 257 voices to the Favorite category.
When converting the song or pattern data to the Arpeggio data, the amount of different notes in the data to be
converted has exceeded sixteen.
The MO is transmitting MIDI bulk data.
File format is not recognized.
A break in the connection with the USB storage device has occurred because of an abnormal electric current.
Disconnect the USB storage device from the USB TO DEVICE connector, then press the [ENTER] button.
Recognizing the USB storage device connected to the USB TO DEVICE terminal.
The USB storage device is full and no more data can be saved. Use a new USB storage device, or make space by
erasing unwanted data from the USB storage device.
A USB storage device is not properly inserted in or connected to the MO.
An error occurred while reading or writing to/from a USB storage device.
The disk is not formatted, or the format is unusable by the MO.
The USB storage device is write protected, or you have attempted to write to a read-only medium such as CD-ROM.
The power consumption of the USB storage device connected to the USB TO DEVICE connector exceeds the
regulated value.
An error occurs when communicating with the USB storage device.
The settings in the Utility mode have been stored.
Explanation