Yamaha MO6 Owner's Manual page 94

Creating a Song
4
Call up the Common Edit display or Part Edit display.
Use Part Edit to edit the parameters for each Part. Use Common Edit to edit the parameters for all of the Parts.
While in the Song Mixing Edit mode, you can switch
between the Common Edit display and the Element
Edit display as shown below.
Calling up the Common Edit display
Press the [COMMON] button to call up the
Common Edit display.
In the Edit mode, the [DRUM KITS] button
functions as the [COMMON] button.
Indicates a Common Edit display.
n
You can mute or solo a Part just as is done with
tracks in the Song Play mode or Pattern Play mode.
Common Edit
Select the menu you wish to edit by pressing
the [F1] – [F5] buttons and [SF1] – [SF5]
5
buttons, then edit the parameters in each
display.
For details on the available parameters, see page 190.
6
Repeat steps 4 – 5 as desired.
Store the edited Song Mixing settings to
internal User memory (DRAM) with the Song
7
data or store it to internal memory (Flash
ROM) as the Mixing Template data.
After pressing the [EXIT] button to return to the Song
Mixing mode, press the [STORE] button to enter the Song
Mixing Store mode, then press the [ENTER] button to
execute the Store operation (page 98).
Before turning the power off, save the stored
8
Song Mixing settings to a USB storage device
as Song data in the File mode (page 98).
Since the Song Mixing templates are stored as System
data (page 150) in the Flash ROM, the data is maintained
even when the power is turned off.
94 Owner's Manual
DRUM
PRE 1 PRE 2 PRE 3 PRE 4
KITS
FAVORITES A. PIANO KEYBOARD ORGAN GUITAR
PLUCKED
A B C D
CHROMATIC
SYN LEAD SYN PAD SYN COMP
PERCUSSION
CHOIR
1 2 3
......
COMMON ELEMENT PERF. PART ZONE
9 10 11
......
TIP
You can store the Mixing settings created in the Song
mode and Pattern mode as original Mixing Template
data. If you are storing the Mixing settings as
Template data, you can call up the same Mixing
settings in another Song or Pattern with a simple
operation.
For details about how to call up a template, see page
77.
Calling up the Part Edit display
Press the desired Part number from the PART [1] –
[16] buttons to call up the Part Edit display.
Indicates the display for editing Part 1.
8
16
Part 1 Edit
Part 2 Edit
Part 3 Edit
Part 4 Edit
Part 16 Edit
Storing the Mixing settings as a
Template