Yamaha MO6 Owner's Manual page 45

2
Select a Performance Bank.
Select one of the Banks from User 1 and 2.
PRE 1 PRE 2 PRE 3 PRE 4
A. PIANO KEYBOARD ORGAN GUITAR
PLUCKED
3
Select a Performance Group.
Performances are divided into Groups [A] – [H]. Select a
Group to display a list of the Performances.
A B C D
SYN LEAD SYN PAD/ SYN COMP CHROMATIC
CHOIR PERCUSSION
Group
4
Select a Performance Number.
Press one of the Number [1] – [16] buttons.
1 2 3 4
ELEMENT/PERF. PART/ZONE
9 10 11 12
5
Play the keyboard.
USER 1 USER 2 GM –
BASS STRINGS BRASS REED PIPE
H
E F G
DRUM/ SE MUSICAL FX COMBI
PERCUSSION
Performance
5 6 7 8
13 14 15 16
Performance Part mute/solo
Each performance can contain a maximum of four Parts,
each of which can be turned on or off independently.
Muting and soloing of Parts is done in the same way as that
of tracks in a Song/Pattern. See page 75.
1 2 3 4
ELEMENT PERF. PART ZONE
9 10 11 12
Using the Category Search function
As in the Voice Play mode, you can use the Category
Search and Favorite Category functions in the Performance
Play mode. For details on how to use the function, see
page 42.
Keyboard MIDI transmit channel
setting
As in the Voice Play mode, you can change the MIDI
transmit channel for the keyboard. Press the [TRACK
SELECT] button (the lamp lights), then press the
appropriate Number button ([1] – [16]). The transmit
channel setting is shown at the top right of the display.
n
You can also set the MIDI keyboard transmit channel from the
Utility mode ([UTILITY] [F5] MIDI
This parameter is available for the Voice mode/Performance mode
but not for the Song mode/Pattern mode.
Performance Play mode
TRACK
5 6 7 8 SELECT
13 14 15 16 MUTE
SOLO
[SF1] CH KBDTransCh).
Owner's Manual 45