Yamaha MO6 Owner's Manual page 95

TIP Song Chain
This function allows Songs to be "chained" together for automatic sequential playback. In this section, try using the
Song Chain features with the Demo Songs.
1
Press the [F6] CHAIN button to call up the Song
Chain display.
From this display you can program and play your own
custom Song sequences.
2
Program the desired order of the Songs.
Move the cursor to "001" by using the cursor buttons and
select the desired Song by using the Data Dial, or the
[INC/YES] and [DEC/NO] buttons. Likewise, assign the
other Songs to locations 002, 003, 004, and so on.
In addition, the following parameters can be set in the
Song Chain.
skip Skips past (ignores) the selected chain number and
continues playback from the next chain number.
stop Stops Song Chain playback at that chain number. You
can restart Song Chain playback from the next chain
number by pressing the [F] (Play) button.
end Indicates the end mark of the Song Chain data.
3
Play the Song Chain.
Move the cursor to the top of the Song Chain display, and
press the [F] (Play) button to start Song playback.
SEQ TRANSPORT
LOCATE
REC
When the Song Chain programmed in step 2 reaches to
the end, playback stops automatically. Press the [ ]
(Stop) button during playback to stop Song Chain
playback.
n
The Song Chain can only be played back in the Song
Chain display, and not from any other display.
Creating a Song
1 2
Owner's Manual 95