Editing A Performance By Using The Knobs - Yamaha MO6 Owner's Manual

Editing a Performance by using the Knobs

TIP
The four knobs at the top left of the instrument are not only for tweaking the sound while you perform—you can also
use them to edit a Performance, either in the Performance Play mode or the Performance Edit mode.
When the [PAN/SEND] indicator is turned on:
PAN Determines the stereo pan position of the Performance.
REVERB Determines the amount of Reverb effect that is applied to the
Performance.
CHORUS Determines the amount of Chorus effect that is applied to the
Performance.
TEMPO Determines the tempo of the Arpeggio assigned to the currently
selected Performance.
When the [TONE] indicator is turned on:
CUTOFF Raises or lowers the Filter cutoff frequency to adjust the tone
brilliance.
RESONANCE Boosts or attenuates the level at the area around the Filter cutoff
frequency.
ATTACK Determines the attack time of the sound. For example, you can
adjust a strings Voice so that the sound gradually swells in volume
by setting a slow attack time – simply turn this knob to the right.
RELEASE Determines the release time of the sound. Turning the knob to the right
sets a long release time and (depending on the Voice assigned to the
selected Performance) lets the sound sustain after the key is released. To
produce a sharp release, in which the sound abruptly cuts off, set a short
release time.
n
The settings above are applied as offsets to the AEG and FEG settings in the Performance Edit mode.
When the [ARP FX] indicator is turned on:
SWING Adjusts the swing feel of the Arpeggio playback.
GATE TIME Adjusts the Gate Time (length) of the Arpeggio notes.
VELOCITY Adjusts the velocity of the Arpeggio notes.
UNITMULTIPLY Adjusts the Arpeggio playback time based on tempo.
When the [EQ] indicator is turned on:
LO Determines the amount of boost or attenuation applied to the low
frequency band of the Master EQ.
LO MID Determines the amount of boost or attenuation applied to the low-
midrange frequency band of the Master EQ.
HI MID Determines the amount of boost or attenuation applied to the high-
midrange frequency band of the Master EQ.
Determines the amount of boost or attenuation applied to the high
HI
frequency band of the Master EQ.
n
The settings above are applied as offsets to the EQ settings in the [PERFORM]
OUT/MEF [SF2] MEQ (Master EQ) display.
When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):
ASSIGN A Adjusts parameters assigned to these knobs in the [UTILITY]
ASSIGN B
ASSIGN 1 Depends on the settings of the Voice assigned to the selected Performance.
ASSIGN 2
n
In addition to above functions, Master Effect related parameters (set in the [PERFORM]
MEF [SF3] MEF display) can be assigned to these four knobs by pressing the [ARP FX] and [EQ] buttons simultaneously. The particular
parameters are assigned to the four knobs can be set in the [UTILITY]
Editing a Performance by using the Control sliders
TIP
[PERFORM] Performance selection
In the Performance mode, the four Control sliders let you independently adjust the levels of the Parts (Voices), letting you control the
overall balance of the Parts.
n
Inadvertent use of the sliders may result in no sound. If this occurs, move the sliders upward.
[PERFORM]
[F2] OUT/MEF
[PERFORM]
[F2] OUT/MEF
[PERFORM]
[F2] OUT/MEF
[PERFORM]
[PERFORM]
[PERFORM]
[PERFORM]
[PERFORM]
[PERFORM]
[F3] ARP
[PERFORM]
[F3] ARP
[PERFORM]
[F3] ARP
[PERFORM]
[F3] ARP
[PERFORM]
[F1] GENERAL
[PERFORM]
[F1] GENERAL
[PERFORM]
[F1] GENERAL
[PERFORM]
[F1] GENERAL
[F4] CTL ASN
[F4] CTL ASN
[EDIT] Part selection [F2] OUTPUT
Performance selection [EDIT] [COMMON]
[SF1] OUT Pan
Performance selection [EDIT] [COMMON]
[SF1] OUT RevSend
Performance selection [EDIT] [COMMON]
[SF1] OUT ChoSend
Performance selection [F6] ARP
Performance selection [F5] EG CUTOF
Performance selection [F5] EG RESO
Performance selection [F5] EG ATK (AEG)
Performance selection [F5] EG REL (AEG)
Performance selection [EDIT] [COMMON]
[SF3] PLAY FX Swing
Performance selection [EDIT] [COMMON]
[SF3] PLAY FX GateTimeRate
Performance selection [EDIT] [COMMON]
[SF3] PLAY FX VelocityRate
Performance selection [EDIT] [COMMON]
[SF3] PLAY FX UnitMultiply
Performance selection [EDIT] [COMMON]
[SF3] MEQ OFS LOW
Performance selection [EDIT] [COMMON]
[SF3] MEQ OFS LOW MID
Performance selection [EDIT] [COMMON]
[SF3] MEQ OFS HIGH MID
Performance selection [EDIT] [COMMON]
[SF3] MEQ OFS HIGH
Performance selection [EDIT]
[SF2] ASSIGN display.
Performance selection [COMMON]
[SF5] MEF display.
[SF1] VOL/PAN Volume
Editing a Performance
Page 172
Page 172
Page 172
Tempo Page 171
Page 171
Page 171
Page 171
Page 171
Page 173
Page 173
Page 173
Page 173
Page 172
Page 173
Page 173
Page 173
[COMMON] [F2]
Page 71
Page 70
[F2] OUT/
Owner's Manual 65