Yamaha MO6 Owner's Manual page 197

[F5] REMIX
This function gives you a variety of semi-random presets for dividing the MIDI sequence data and altering the note lengths, letting you create completely new
variations of a Pattern.
Set the parameters below, then press the [ENTER] button to execute the Remix operation. You can press the Play button at this point to hear the results of the
Remix. If you're not satisfied with the results, try another Type/Variation and press [ENTER]. If you want to keep the changes, press [SF5] OK. (Undo cannot
be used with Remix.) To return to the original display without altering the data, press the [SF4] CANCEL button.
n
Since the remixed data is stored as a new phrase and assigned to the current track, the original phrase data remains as an unassigned phrase.
Type
Variation
Interval
[F6] CHAIN
Pattern Chain Play mode
Pattern Chain Record mode
Pattern Chain Edit mode
[F1] CHANGE
Pattern Track Edit
Scene Track Edit
Tempo Track Edit
[F2] COPY
[F3] SONG
Determines how the data in a measure will be divided and rearranged. The division and rearrangement rules
are different for each remix type. The type is also shown graphically in the display.
Settings: 1 – 16
Determines how the original MIDI sequence data will be modified.
Settings: Normal 1 – 16, Roll 1 – 16, Break 1 – 16, Fill 1 – 48
Normal 1 –1 6 ....... The original data is only divided and rearranged. 16 variations are provided.
Roll 1 – 16............. In addition to division and rearrangement, some portions of the data may be played with a roll effect.
16 variations are provided.
Break 1 – 16 ......... In addition to division and rearrangement, some portions of the data may be deleted to create breaks.
16 variations are provided.
Fill 1 – 48 .............. In addition to division and rearrangement, some portions of the data may be played with a roll effect.
48 variations are provided.
Determines the measure(s) to which Remix is applied.
Settings: 1 – 8
For example, when set to "1," Remix is applied to all measures. When set to "2," Remix is applied to measures 2, 4, 6, etc. (every
other measure). When set to "3," Remix is applied to measures 3, 6, 9, etc. (every third measure).
Refer to page 84 in the Quick Guide section.
[PATTERN] [F6]
This mode lets you play the programmed section chain sequence created in the Pattern Record mode and
Pattern Edit mode. The parameters are the same as in the [F1] PLAY display.
[PATTERN] [F6] [REC]
Recording Standby mode
During Recording [PATTERN] [F6]
When recording the tempo track, you can change the tempo value.
When recording the scene track, you can change the track mute setting.
When recording the Pattern track, you can change the section.
[PATTERN] [F6] [EDIT]
The Pattern Chain Edit mode makes it possible to edit the order of the sections in a chain, as well as insert
tempo, and scene/mute event data.
Call up the desired track display by pressing the [F4] TR SEL button to edit the selected track.
From this display, you can edit the section changes for each measure. Move the cursor to the "Section" column
for the desired measure, and enter the desired section. To set the end of the chain, enter an END mark at the
appropriate measure.
To clear the event at the currently selected location, press the [F6] CLEAR button.
You can edit the track mute change in beats. Use the [F5] INSERT and [F6] DELETE button to insert/delete the
event.
You can edit the tempo change in beats. Use the [F5] INSERT and [F6] DELETE button to insert/delete the
event.
Source range
Top measure of destination
CAUTION
This operation overwrites any events already existing at the destination.
This function converts the Pattern chain data to Song data (standard MIDI format) and places the results in the
normal Song tracks.
After specifying the desired destination Song and measure number to which the converted data is to be
copied, then press the [ENTER] button to execute.
CAUTION
This operation overwrites any data already existing at the destination range.
You can select one of the following tracks for
Recording track
recording.
• patt (Pattern): Records section changes during
playback
• tempo: Records tempo change information
during playback
• scene: Records track mute settings during
playback
[REC] [F] (Play)
This display lets you copy all Pattern chain events
from a specified range of measures (source) to a
destination location.
After specifying the source range in measures, the
top measure of the destination location, and
NumberOfTimes (number of times the data is
copied), press the [ENTER] button to execute the
Copy operation.
Pattern Play mode
Owner's Manual
197