Yamaha MO6 Owner's Manual page 74

Playing the Demo Songs/Patterns
2
Set the LoadType to "All."
Any of following three types can be set. However, for this example, select "All."
All ................ Loads both the Demo Song and Pattern data.
Song ............ Loads only the Demo Song data.
Pattern ........ Loads only the Demo Pattern data.
3
Press the [ENTER] button to load the Demo data.
After the data is loaded, the Song Play display is automatically called up.
Song track number and
track mute/solo status
Track data status
n
The explanations here also apply to the Pattern mode.
Press the [F] (Play) button to start Song
4
playback.
When playback of the selected Song is finished, the Song
automatically stops.
You can stop the Song anytime during playback by
pressing the [J] (Stop) button. This pauses the Song at
the current position. To resume playback of the Song from
that point, press the [F] (Play) button again. To instantly
return to the beginning of the Song, press the [ I E] (Top)
button.
SEQ TRANSPORT
LOCATE 1 2
REC
Start
74 Owner's Manual
Transpose setting (for entire Song)
Currently selected Song
01 : Dub'nBass
Song number
Song name
Indicates muted track.
Indicates a MIDI track
containing MIDI sequence data.
SEQ TRANSPORT
Top button
LOCATE 1 2
REC
Stop
Tempo for the selected Song
Time signature for the selected Song
Indicates soloed track (page 75).
Indicates that the track has
no recorded data.
5
Select and play another Demo Song.
Move the cursor to "Song Number: Name" (with the cursor
buttons) then select another Song by using the Data Dial,
or the [INC/YES] and [DEC/NO] buttons.
Decreases number
DEC/NO
Decreases number
Song number: Name
Next, let's play a Demo Pattern.
Location settings for the selected Song
Measure: Beat
(for current playback location)
ARP1-ARP5
Use the [SF1] – [SF5] buttons to call
up the Arpeggio type and Song
Scene assigned to each button
(page 89).
Increases number
INC / YES
Increases number
SEQ TRANSPORT
LOCATE 1 2
REC
Start