Yamaha MO6 Owner's Manual page 125

Using Zones effectively with an external tone generator
The two examples below show how to use the Zones with both the internal tone generator and a connected external tone
generator. These instructions correspond to the steps on the previous page.
n
Though all four Zones are used in the example below, you can use any number of Zones (two, three, or four). The settings are made with the
MIDISwitch parameter ([MASTER]
Zone selection [F1] TRANS
n
In these examples, the Zones are assigned to different areas of the keyboard. However, two or more Zones can also be assigned to the same area in a
layer, from the NOTE display ([MASTER]
Master settings with the Voice mode/Performance mode (Single-timbre tone generator mode)
External tone generator (Multi-timbral)
Set the MIDI receive channel for each part.
MIDI Transmit MIDI Transmit
Channel 1 Channel 2
Internal tone generator (Single Timbre)
[UTILITY] [F5] MIDI
Master settings with the Song mode/Pattern mode (Multi-timbral tone generator mode)
External tone generator (Multi-timbral)
Set the MIDI receive channel for each part.
MIDI Transmit MIDI Transmit
Channel 1 Channel 2
Part 05 Part 13
Receive Receive
Channel 1 Channel 2
Internal tone generator (Multi-timbral)
[SONG] [MIXING] [EDIT] Part selection
[F1]VOICE [SF2]MODE ReceiveCh
[EDIT] Zone selection
TGSwitch).
[EDIT] Zone selection
MIDI Transmit MIDI Transmit
Channel 3 Channel 4
[SF1] CH BasicRcvCh = 01
MIDI Transmit MIDI Transmit
Channel 3 Channel 4
Creating Your Original Program Set (Master mode)
[F1] TRANS MIDISwitch) and the TGSwitch parameter ([MASTER]
[F2] NOTE).
For each Zone, set whether or not MIDI data is transmitted
to the external instrument.
[MASTER] [EDIT] Zone selection
Determine the MIDI Transmit Channel for each zone.
[MASTER] [EDIT] Zone selection
Determine the note range of each zone.
[MASTER] [EDIT] Zone selection
[MASTER] [EDIT] Zone selection
For each Zone, set whether or not MIDI data is transmitted
to each Part of the internal tone generator.
[MASTER] [EDIT] Zone selection
For each Zone, set whether or not MIDI data is transmitted
to the external instrument.
[MASTER] [EDIT] Zone selection
Determine the MIDI Transmit Channel for each zone.
[MASTER] [EDIT] Zone selection
Determine the note range of each zone.
[MASTER] [EDIT] Zone selection
[MASTER] [EDIT] Zone selection
For each Zone, set whether or not MIDI data is transmitted
to each Part of the internal tone generator.
[MASTER] [EDIT] Zone selection
[EDIT]
[F1] TRANS MIDISwitch
[F1] TRANS TransCh
[F2] NOTE NoteLimitH
[F2] NOTE NoteLimitL
[F1] TRANS TGSwitch
[F1] TRANS MIDISwitch
[F1] TRANS TransCh
[F2] NOTE NoteLimitH
[F2] NOTE NoteLimitL
[F1] TRANS TGSwitch
Owner's Manual 125