File mode
[F4] RENAME
Select the desired file type.
Rename the selected file/folder here.
[SF1] EXEC
[SF2] SETNAME
[F6] NEW
[F5] DELETE
Select the desired file type.
Select the file or folder to be deleted.
Owner's Manual
212
From this display you can rename files or folders in the selected USB storage device, using up
Select the file/folder to be renamed.
to eight alphabetic and numeric characters. Files are named according to the MS-DOS naming
convention. If the file name contains spaces and other characters unrecognized in MSDOS,
these characters will automatically be replaced by "_" (underscore) characters when saving.
Executes renaming of the file.
n
The [ENTER] button on the panel is used to call up the contents of the selected folder.
Copies the file/folder name selected in the File/Folder selection box into the File name column.
Creates a new folder within the current folder.
From this display you can delete files/folders from the selected USB storage device. Select the
desired file or folder as shown below, then press the [SF1] EXEC button.
n When you wish to delete a folder, delete all the files and folders contained in the folder beforehand.
Please keep in mind that only folders that contain no files or other nested folders can be deleted.