Yamaha MO6 Owner's Manual page 116

Using the MO with computer software
Data dial, [INC/YES] and [DEC/NO] buttons
When the [DIAL] menu appears at
the [SF4] button
When the menu does not appear at
the [SF4] button
n
You can also move the song position by using the cursor [<] [>] buttons.
Knobs
Assigns the functions of eight knobs on the DAW controller (01X, Mackie Control, and Logic Control) to the four Knobs on the
MO. The Knobs let you control various parameters of each track (part). Pressing the [SF5] button changes which group of
knobs is assigned (knobs 1 – 4 or knobs 5 – 8). The eight knobs on the DAW controller can also be used as switches. The
switch function corresponding to the knob track (part) at the cursor position is also assigned automatically to the [ENTER]
button, since the Knobs on the MO do not have a switch function.
Control sliders
Assigns the functions of eight sliders on the DAW controller (01X, Mackie Control, and Logic Control) to the four Control
sliders on the MO. The sliders let you control the volume of each track (part). Pressing the [SF5] button changes which
group of faders (faders 1 – 4 or faders 5 – 8 on the DAW controller) is assigned to the Control sliders on the MO.
Control function buttons, [F1] – [F6] buttons, [SF1] – [SF5] buttons
When the Mode is set to "General" These buttons are assigned to perform the same functions as the panel buttons on the 01X. The corresponding names
When the Mode is set to "Logic"
When the Mode is set to "Cubase,"
"SONAR," or "D.Perf"
n
Among the functions assigned to the [F1] – [F6] buttons and [SF1] – [SF5] buttons, the functions indicated with brackets (such as [DIAL]) are not
related to the Mackie Control, Logic Control and 01X but are unique to the MO.
Cursor [<] [>] buttons
By moving the cursor left/right, you can change the track or part to controlled by the data dial and [INC/YES]/[DEC/NO]
buttons. Pressing the Cursor [>] button moves through the columns in succession (1, 2, 3, 4...). After 4, the cursor is hidden
and wraps around to 1. Press the [SF5] KN 5 – 8 (KN 1 – 4) button to move the cursor up/down.
Cursor [ ] [ ] buttons
When the Mode is set to "General"
When the Mode is not set to
"General"
[EXIT] button
When the Mode is set to "General"
When the Mode is not set to
"General"
Bank, Group [A] – [H], Number [1] – [16] buttons
These buttons are assigned to perform the same functions as the buttons directly over the faders on the Yamaha 01X,
Mackie Control and Logic Control.
When the Mode is set to "General"
When the Mode is not set to
"General"
116 Owner's Manual
These controls can be used to set the value for the knob of the DAW controller, for the track/part selected by the cursor.
The Knobs can also be used, but these help you make fine adjustments to the value that are difficult to make with the
Knobs.
The buttons can be used to move the song position in the DAW.
of the 01X panel buttons are also indicated at the bottom of the display of the MO.
These buttons are assigned to perform the same functions as the panel buttons on the Logic Control. The
corresponding names of the Logic Control panel buttons are also indicated at the bottom of the display of the MO.
These buttons are assigned to perform the same functions as the panel buttons on the Mackie Control. The
corresponding names of the Mackie Control panel buttons are also indicated at the bottom of the display of the MO.
These buttons are assigned to the functions of the DISPLAY [ ][ ] buttons on the 01X.
These buttons are assigned to the functions of the cursor up/down buttons on the Mackie Control and Logic Control.
The button is assigned to the function of the [PAGE SHIFT] button on the 01X.
Not used.
Numbers [1] – [8] and [TRACK SELECT] buttons
These buttons are assigned to the functions of the nine [SEL] buttons on the Yamaha 01X.
Numbers [9] – [16] and [MUTE] buttons
These buttons are assigned to the functions of the nine [ON] buttons on the 01X.
[PRE1] – [–] buttons
These buttons are assigned to the functions of the eight [REC/RDY] buttons on the Mackie Control and Logic Control.
Group [A] – [H] buttons
These buttons are assigned to the functions of the eight [SOLO] buttons on the Mackie Control and Logic Control.
Numbers [1] – [8] buttons
These buttons are assigned to the functions of the eight [MUTE] buttons on the Mackie Control and Logic Control.
Numbers [9] – [16] buttons
These buttons are assigned to the functions of the eight [SELECT] buttons on the Mackie Control and Logic Control.