Connecting To External Audio Equipment; Connecting The Mo To External Devices; Connections - Yamaha MO6 Owner's Manual

Connecting the MO to external devices

Connections

Connecting to External Audio Equipment

Since the MO has no built-in speakers, you'll need an external audio system or a set of stereo headphones to properly
monitor it. Alternatively, you could use a pair of headphones.
There are several methods of connecting to external audio equipment, as described in the following illustrations.
Audio Output
Analog Output
For optimum, accurate reproduction of the instrument's rich sounds, effects and full stereo image, use a pair of powered
speakers. Connect the powered speakers to the OUTPUT L/MONO and R jacks on the rear panel.
n
When using just one powered speaker, connect it to the OUTPUT L/MONO jack on the rear panel.
Digital Output
The sound output through the OUTPUT jacks by analog can also be output by digital through the DIGITAL OUTPUT jack.
Using this digital output jack, you can record the keyboard performance or Song/Pattern playback of this synthesizer to
external media (e.g., an MD recorder) with exceptionally high-quality sound.
Powered speaker (Left)
Headphones
OUTPUT L/MONO
PHONES
DIGITAL OUTPUT
MO
Powered speaker (Right)
OUTPUT R
MO
Coaxial cable
Recording
DIGITAL
INPUT
DAT
DAT or CD recorder
Connections
Owner's Manual 103