Yamaha MO6 Owner's Manual page 101

3
Select a file type to be loaded.
You can load the file (extension: M7A) saved as "All" by selecting one of the following file types.
All All data in a file that is saved to the USB storage device as an "All" type can be loaded and restored to this instrument.
Voice A specified Voice in a file can be individually selected and loaded to this instrument.
Performance A specified Performance in a file can be individually selected and loaded to this instrument.
Song A specified Song in a file can be individually selected and loaded to this instrument.
Pattern A specified Pattern in a file can be individually selected and loaded to this instrument.
4
Select a file ( ) to be loaded.
Move the cursor to the file (extension: M7A) which was saved as "All" on previous page.
When Type is set to "All," go to step 5.
When Type is set to something other than "All," follow the instructions below then go to step 5.
When Type is set to "Voice" or "Performance":
You can select and load a specified Voice or Performance in the file (extension: M7A) to this instrument.
Move the cursor to the file (extension:
M7A) which was saved as "All" on
previous page.
When Type is set to "Song" or "Pattern":
You can select and load a specified Song or Pattern in the file (extension: M7A) to this instrument.
Move the cursor to the file (extension:
M7A) which was saved as "All" on
previous page.
CAUTION
Loading data to this synthesizer automatically erases and replaces any existing data in the User memory. Make sure to save any important data to a
USB storage device before performing any Load operations.
5
Press the [ENTER] button to execute the Load operation.
After the data has been loaded, a "Completed" message appears and operation returns to the original display.
CAUTION
While the data is being saved/loaded, make sure to follow these precautions:
• Do not remove or eject the media from the USB storage device.
• Do not unplug or disconnect the USB storage device.
• Do not turn off the power of the instrument or the relevant devices.
ENTER
All Voices or Performances in the selected
file are listed. Move the cursor to the
desired Voice or Performance to be loaded.
EXECUTE
ENTER
All Songs or Patterns in the selected file are
listed. Move the cursor to the desired Song
or Pattern to be loaded.
EXECUTE
Creating a Song
Select the desired Voice
or Performance.
Select the destination Voice number
or Performance number.
Select the desired
Song or Pattern.
Select the destination Song number
or Pattern number.
Owner's Manual 101