Pattern Job Mode - Yamaha MO6 Owner's Manual

Pattern Job mode

The Pattern Job mode contains a comprehensive set of editing tools and functions you can use to change the sound of the Pattern. It also
includes a variety of convenient operations, such as copying or erasing data.
After setting parameters as required from the selected display, press the [ENTER] button to execute the Job.
CAUTION
An "Executing..." message is shown when it takes a short amount of time to execute the Job. Never attempt to turn off the power while an
"Executing..." message is shown. Turning the power off in this state results in loss of all user data.
[F1] UNDO/REDO
The Undo Job cancels the changes you made in your most recent recording session, editing session, or Job, restoring the data to its previous state. This
allows you to recover from accidental data loss.
Redo is available only after using Undo, and lets you restore the changes you made before undoing them.
CAUTION
Undo/Redo does not work with Mixing Voice operations.
[F2] NOTE (Note data Job)
Specify the phrase and the range (in measures/beats/clocks)
over which the Job is applied.
01: Quantize
02: Modify Velocity
03: Modify Gate Time
04: Crescendo
05: Transpose
06: Glide
07: Create Roll
08: Sort Chord
09: Separate Chord
[F3] EVENT (Event Job)
The Event Jobs in the Pattern mode are basically same as in the Song Job mode. However, unlike in the Song Job mode, Pattern Event Jobs are applied to
the phrases (001 – 256) and a selected range in the phrase (measure : beat : clock).
01: Shift Clock
02: Copy Event
03: Erase Event
04: Extract Event
05: Create Continuous Data
06: Thin Out
07: Modify Control Data
08: Beat Stretch
[F4] PHRASE (Phrase Job)
01: Copy Phrase
02: Exchange Phrase
[PATTERN]
The Note data Jobs in the Pattern mode are basically same as in the Song Job mode. However,
unlike in the Song Job mode, Pattern Note data Jobs are applied to the phrases (001 – 256) and
a selected range in the phrase (measure : beat : clock).
Same as in the Song Job mode. See page 183.
Same as in the Song Job mode. See page 184.
Same as in the Song Job mode. See page 184.
Same as in the Song Job mode. See page 184.
Same as in the Song Job mode. See page 185.
Same as in the Song Job mode. See page 185.
Same as in the Song Job mode. See page 185.
Same as in the Song Job mode. See page 185.
Same as in the Song Job mode. See page 185.
Same as in the Song Job mode. See page 186.
Same as in the Song Job mode. See page 186.
Same as in the Song Job mode. See page 186.
n
Unlike in the Song Job mode, "Tempo," "Scene Memory," or "Track Mute" cannot be selected as Event Types.
Same as in the Song Job mode. See page 186.
Same as in the Song Job mode. See page 186.
n
Unlike in the Song Job mode, "Tempo" cannot be selected as an Event Type.
Same as in the Song Job mode. See page 187.
Same as in the Song Job mode. See page 187.
n
Unlike in the Song Job mode, "Tempo" cannot be selected as an Event Type.
Same as in the Song Job mode. See page 187.
Selects the Pattern and phrase to be copied.
(Preset phrase also can be selected.)
Specify the destination Pattern and phrase.
This Job exchanges or "swaps" the contents of two specified phrases ("A" and "B").
Pattern selection [JOB]
This Job copies a selected phrase to the
designated destination phrase.
After specifying the source Pattern and phrase
and the destination Pattern and phrase, press the
[ENTER] button to execute this Job.
CAUTION
Any previous data in the copy destination will
be overwritten.
Pattern Job mode
Owner's Manual
199