Yamaha MO6 Owner's Manual page 115

Using the Remote Control functions
1
To enter the Remote Control mode, press the [DAW REMOTE] button (the lamp flashes).
The REMOTE display appears, and the panel controls are enabled for Remote operation of the computer software (their
normal functions are disabled).
n
Press this button again to exit from the Remote Control mode.
2
Select the software to be remote-controlled (Mode A or Mode B).
Change the Mode by simultaneously holding down the [F6] SHIFT button and pressing the [DAW REMOTE] button.
Mode A
3
Use the Knobs and buttons on the MO to remotely control the software.
The following explains which sequencer functions are assigned to which panel controls in the remote control.
n
For details about how to operate the Editor, refer to the PDF manual included with the Editor.
Press the Control function button to
change the functions assigned to the
[F1] – [F6] and [SF1] – [SF5] buttons
(shown at the bottom of the display).
Refer to the separate Data List.
PAN SEND
ASSIGN
TONE
ARP FX
MEF
EQ
[J], [F], [I], [ I E], [G], [H] buttons
The six MODE buttons are used as transport controls, letting you start/stop playback of the DAW software on the computer.
[EDIT], [JOB], and [STORE] buttons
When the Mode is set to "General"
or "Cubase"
When the Mode is set to "Logic"
When the Mode is set to "SONAR"
When the Mode is set to "D.Perf"
[ARPEGGIO ON/OFF] button
When the Mode is set to "General"
or "Cubase"
When the Mode is set to "Logic"
When the Mode is set to "SONAR"
When the Mode is set to "D.Perf"
DAW
REMOTE
F 6
These dark bars serve as the cursor, indicating the
track/part currently being edited by the Knob.
Moving the slider automatically moves the cursor to
the corresponding track/part.
The functions of the buttons on each DAW controller are assigned to
the [F1] – [F6] and [SF1] – [SF5] button on the MO. The functions to
be assigned depend on the software selected in the Mode A or B.
For details, refer to the "Remote Control Assignments" on page 117.
Not used.
These buttons perform the same functions as those of the [OPTION], [CONTROL] and [ALT] buttons on the Logic
Control.
These buttons perform the same functions as those of the [M2], [M3] and [M4] buttons on the Mackie Control.
These buttons perform the same functions as those of the [OPTION], [CONTROL] and [COMMAND] buttons on the
Mackie Control.
Not used.
The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
The button can be used to switch the whether the send/effect number of DAW is displayed on the LCD or not.
Using the MO with computer software
FILE UTILITY
DEMO
DAW
REMOTE
Mode B
Upper row indicates the setting
values for knobs/sliders 1 – 4 on
the DAW controller.
Bottom row indicates the setting
values for knobs/sliders 5 – 8 on
the DAW controller.
Owner's Manual 115