Yamaha MO6 Owner's Manual page 200

Pattern Job mode
03: Mix Phrase
04: Append Phrase
05: Split Phrase
06: Get Phrase From Song
07: Put Phrase To Song
08: Clear Phrase
09: Phrase Name
[F5] TRACK (Track Job)
01: Copy Track
02: Exchange Track
Owner's Manual
200
This Job mixes all data from two selected user phrases
("A" and "B"), and places the result in phrase B.
This Job appends one phrase (A) to the end of another (B)
to create one longer phrase (B).
This Job splits a selected phrase (A) into two separate
phrases (A and B).
The data before the split point is stored to the original phrase
A and the data after the split point is moved and stored to
another phrase B. You can also set the Meters of the phrase
A and B after the Split Phrase Job.
n
When either Pattern or Phrase is set to "off," the split Phrase B
data is erased.
CAUTION The Job overwrites any data already existing in destination phrase B.
Source Song, track, and range of
measures to be copied.
Destination Song, track,
Source phrase
and top measures
This Job deletes all data from the selected phrase.
This Job lets you assign a name (of up to eight characters) to the selected phrase.
For instructions on naming, refer to page 38 in the Basic Operation section.
Source Pattern,
section, and track
Types of data to be copied
Target tracks for the Exchange operation
Types of data to be exchanged
Phrase A
Phrase B
Phrase A
Phrase A
This Job copies a segment of sequence-track
Destination phrase
data from a Song into the designated destination
phrase.
After specifying the source Song/track/range of
measures to be copied and the destination
phrase, press the [ENTER] button to execute this
Job.
CAUTION
The Job overwrites any data already existing in
the destination phrase.
This Job copies a selected user phrase into a
specified area of a selected song.
After specifying the source phrase and destination
Song/track/top measure, press the [ENTER]
button to execute this Job.
CAUTION
The Job overwrites any data already existing in
the destination track.
This Job copies all data from a specified source
Destination Pattern,
section, and track
track to the specified destination track.
The types of data to be copied are the same as in
the Song Job mode. See page 188.
This Job exchanges or "swaps" the specified type
of data between two specified tracks in the current
Pattern and section. The types of data to be
exchanged are the same as in the Song Job
mode. See page 188.
Phrase B
Mix Phrase
Phrase B
Phrase A
Append Phrase
Phase A is divided at the Split Point
Phrase B