End of Program/Infusion and Bag Change
Once the infusion had reached to an end (Pre-set
volume was infused), an alarm sounds and display
will show:
The alarm will stop after 4 beeps. The pump will
show the pre-set KVO rate (see "Change Set Up).
The alarm will sound again every 4 minutes, until
the user changes bag or stops the pump.
To prime the set:
To Prime the set (may be necessary if you have changed the set or if you are
using a set with a drip chamber):
If in fact necessary, press
twice.
Select Change Bag and press
.
NOTE: If using an infusion set with drip chamber, change to a new infusion bag,
but make sure that the drip chamber is half filled and there is no air in the
administration set.
Software ver. CVPCA30E_1
44
Need help?
Do you have a question about the BodyGuard 575 Color Vision and is the answer not in the manual?