Clinician Activated Bolus - CME BodyGuard 575 Color Vision Operator's Manual

Using a Bolus Cable for PCA
SAFETY CHECK: Prior to connecting the bolus cable to the pump test the bolus
cable. Press and release the handset button – you should feel and hear an audible
click each time.
If you do not then the probability is that the handset is damaged and should
be removed from use. Contact your local distributor.
 Press the button located at the end of the bolus cable. The bolus cable plugs
into the side of the pump where a label reads "Bolus".
 The bolus button must be pressed for a minimum time in order to activate a
bolus. This feature prevents unintentional bolus.
 The bolus button must also be released within a certain timeframe. This feature
prevents unintentional bolus in case a button is accidentally sat on or otherwise
permanently pressed.
 The pump will not accept a second press within a minimum time interval
removing the risk that movement triggering a series of apparent requests
(within the correct min and max pressing times) from being recognized as a
genuine request.
 NOTE: User can stop bolus at any time by pressing
 NOTE: If patient requests more boluses than are allowed, the pump will
display "Bolus Locked" and will track the amount of boluses have
been requested. The bolus history can be reviewed by scrolling the
Info Menu. See "Using History Functions" section of the manual
 NOTE:
During operation, bolus parameters (volume and interval time) can be
changed by pressing

Clinician Activated Bolus

A Clinician Activated Bolus can be performed before starting the infusion or during the
infusion.
To infuse a Clinician Activated Bolus before starting the infusion, perform the following
steps:
1. Selecting the Prime option from the menu, the screen will
show the priming screen. Select Clinician bolus option.
Software ver. CVPCA30E_1
key and confirming the relevant access code.
36