Table of Contents
Advertisement
Job ticket options
9-38
Guide to Printing Using Xerox Production Print Services
•
Stocks in the Stock Library (names and records)
•
Fonts that have been loaded
•
Destination ICC profiles
•
CMYK intensity transfer functions (TRC)
•
RGB source color profile
•
CMYK source color profile
•
CMY source color profile
•
Gray source color profile
Sources for the printer capabilities file for Windows
You are not able to generate a printer capabilities file using XDS
on your Windows system. Instead, you must create the file in
XDS Plus. You can either load XDS Plus on your PC that is
running Windows and create the file on your own system, or you
can create the printer capabilities file on a different system and
transfer it to your PC.
Systems on which you can load and run XDS Plus include:
•
A PC running Windows
•
A Sun workstation running Solaris 2.6 or 2.8
•
Your DocuSP printer controller running DocuSP 3.X software.
Generating a printer capabilities file on XDS Plus
Follow these steps to generate a printer capabilities file for XDS,
using XDS Plus:
1. Install and open XDS Plus on one of the systems that
supports it. Refer to the Guide to Submitting Jobs Using XDS
Plus for the installation procedure.
2. On the XDS Plus window, select [Administration].
3. If necessary, select the [Status] tab to display the Status
window.
4. In the [Queues] section of the Status window, select a queue
name.
5. From the Options pull-down menu, select [Generate Printer
Capabilities File...].
Advertisement
Table of Contents
