Selecting A Stock For The Job; Creating A New Stock - Xerox 701P40016 Print Manual

Xerox printer user manual
Table of Contents

Advertisement

Guide to Printing Using Xerox Production Print Services
[User Stock]: Displays the Custom window, which contains
fields that enable you to define properties for a user stock.
Refer to "Adding a user stock," later in this chapter, for the
procedure.
[Apply]: Implements the changes that you have made on
the stock window without closing the window.
[OK]: Implements your changes and closes the stock
window.
[Cancel]: Closes the stock window without making any
changes that you may have entered.

Selecting a stock for the job

You are able to select one stock for the current job. The web
interface does not support special pages that may require
additional stocks. Use the following procedure if the stock that
you want to use for your job does not appear on the Main Paper
Stock pull-down menu on the Job Setup window.
1. On the Job Submission window, select [Stocks...]. The stock
window is displayed.
2. On the stock window, select the radio button at the left of the
desired stock name. You may select a printer stock from the
[Stocks] section, or the current user stock.
If you do not see the stock that you want on the stock
window, you may add the stock as the user stock. Refer to
"Creating a new stock," later in this chapter, for the procedure
for creating a new custom stock.
3. If you want this stock to remain on the Main Paper Stock pull-
down menu after the job is completed and new job
parameters are entered, select the [Favorites] check box next
to the stock name on the stock window.
4. Select [OK] to confirm your selection and close the stock
window. The stock name that you selected appears in the
Main Paper Stock field on the Job Submission window.

Creating a new stock

You can create a new custom stock that becomes the user stock
and specify this stock for subsequent jobs. When you add a new
user stock, it replaces the existing user stock; you are not able to
have more than one user stock available at a time.
Follow these steps to create a new user stock:
Printing a job using the DocuSP web interface
4-11

Advertisement

Table of Contents
loading

Table of Contents