Using the XDS Plus software
Selecting a printer and queue
3-12
Guide to Printing Using Xerox Production Print Services
Follow these steps to select a printer and print queue for your
job:
1. On the XDS Plus window, select [Change Printer] to open the
Change Printer window.
2. If the queue that you want is not displayed in the [Queues]
section, select [Show All Queues].
3. In the [Queues] section, select the name of the queue to
which you want to send the job.
The Printers section displays the name of the printer that is
associated with the queue that you selected.
4. Select [Set Print Path] to confirm your selection and close the
Change Printer window.
NOTE: This can also be performed using the Printer menu and
select [Change Queue].