Table of Contents
Advertisement
Guide to Printing Using Xerox Production Print Services
Specifying the number of copies
When [Printer Default] is selected, the job is printed using the
option that was set in one of the categories that are shown in
priority order in the following figure.
The figure above illustrates that parameters that are specified as
queue overrides at your printing system controller are used as
defaults first. If no queue overrides have been specified,
parameters on any exception pages are used, and so on.
NOTE: If the [Printer Default] check box is selected, you must
deselect it if you want to select any of the other options in the
same field.
For information regarding selecting a print queue, refer to
"Selecting a Print Queue" found later in this chapter.
To select the number of copies of your document that will be
printed, follow these steps:
1. On the Job Submission window, scroll until the [Quantity] field
is visible.
2. In the [Quantity] text box, either enter the number of copies,
or select the arrow buttons until the desired number of copies
is displayed.
Printing a job using the DocuSP web interface
4-7
Advertisement
Table of Contents
