Specifying A Finishing Option; Specifying Collation; Specifying Slip Sheets - Xerox 701P40016 Print Manual

Printing a job using the DocuSP web interface

Specifying a finishing option

Specifying collation

Specifying slip sheets

4-14
Guide to Printing Using Xerox Production Print Services
The [Finishing] field allows you to select how the job is finished.
The available finishing options are dependant on the selected
printer. Refer to the "Job ticket features by printer" chapter for
information on the finishing options that each printer supports.
The icon at the left of the Finishing menu changes to reflect your
selection.
NOTE: If custom finishing for DocuTech 61xx and DocuPrint
EPS printers is supported, a pull-down menu will become
editable allowing you to type in custom finishing.
When [Collated] is selected, the pages of each copy of the
document print in numerical sequence. If collation is not
specified, the system prints all copies of the first page, followed
by all copies of the second page, and so on.
1. To specify collation, select the [Collated] check box. The icon
at the left of the check box changes to reflect your selection.
When [Slip Sheets] is selected, blank sheets are inserted
between sets of collated jobs. The default stock for the slip
sheets is the main paper stock that was specified for the job,
except that the color of the slip sheet stock is blue. If the main
paper stock that was programmed for the job is blue, then white
stock is used for the slip sheets.
NOTE: Slip sheets can only be specified for collated jobs and
jobs without finishing.
1. To specify slip sheets, select the [Slip Sheets] check box. The
icon at the left of the check box changes to reflect your
selection.