Table of Contents
Advertisement
Guide to Printing Using Xerox Production Print Services
Printing a document
Selecting a print queue
•
[Character Set]: From the pull-down menu, select the
font in which all text on the web interface Job Submission
windows will be presented.
•
[Units]: Allows you to select the unit of measure in which
measurements will be expressed on the web interface Job
Submission windows. Select the radio button next to
[Inches] or [Metric].
•
[Use document name as the job name]: Automatically
uses the document file name as the name of the job on
the Job Notes window.
Select the [Require the account when submitting a job]
check box if you to require the account when submitting a
job.
3. [Restore Factory Default] button: Restores the defaults
that were set for the printer when it was manufactured.
4. Select [OK] to save your changes and to close the
Preferences window.
If you want to close the Preferences window without saving
any changes, select [Cancel].
After you have set up the job ticket parameters for your print job,
follow these procedures to print the job.
The Queue pull-down menu, located on the stationary print
section of the Job Submission window, contains a list of the
queues that have been set up for your printer.
1. From the Queue menu, select the name of the queue to
which you want to send the job.
2. If you want to make the selected queue the default queue,
which is selected and displayed in the [Queues] field
whenever the Job Submission window is opened, select the
[My Default Queue] check box.
Printing a job using the DocuSP web interface
4-25
Advertisement
Table of Contents
