Table of Contents
Advertisement
Guide to Printing Using Xerox Production Print Services
Viewing printer and queue properties
•
[Set Print Path]: Confirms your queue selection and closes
the Change Printer window. This button is grayed out unless
a queue is selected.
•
[Refresh]: Updates and redisplays the Printers and Queues
lists.
You can view information about printers and queues in the
following ways:
•
Select the printer or queue name on the Change Printer
window.
– If you select a printer name, the [Queues] section of the
Change Printer window displays the queues that are
enabled for that printer only.
– If you select a queue name, the [Printers] section of the
Change Printer window displays only the printer that
contains that queue.
You can select multiple printer or queue names by holding
down the <Control> or <Shift> key while selecting the items.
If you select more than one printer or queue, the other
window displays the queues or printers for all the items that
you selected.
•
Open the Properties window for the desired queue or printer
by following these steps:
1. Select [Change Printer] on the XDS Plus window. The
Change Printer window opens.
2. In the [Printers] or [Queues] section on the Change
Printer window, double-select the name of the printer or
queue. Or, right-select on a printer or queue and select
[Properties]. The read-only Properties window opens for
the selected queue or printer.
3. When you are finished viewing the information, select
[Close] to close the Properties window.
NOTE: You can also access individual printer and queue
information from the Printers and Queues lists on the Print
Monitor tab window, which you display by selecting
[Administration] on the XDS Plus window.
Using the XDS Plus software
3-11
Advertisement
Table of Contents
