Table of Contents
Advertisement
Prerequisites
2.
Using XDS
This chapter contains the procedures for accessing the XDS
software on a Xerox printing system from your computer running
Windows 95, Windows 98, Windows NT 4.0, Windows 2000,
Windows Millennium, XP, a Sun workstation that is running
Solaris 2.6 or 2.8, or from a Macintosh that is running OS X. The
Xerox Document Submission (XDS) software provides you with
windows you use to select a document file, to set up the job
ticket, and to submit your print job to the printer.
When you run the XDS software, you must make your printer
and document selections from the XDS window before
programming the job ticket.
NOTE: If you created your PDL file using the print to disk or print
to file option, and any of the Xerox printer drivers, do not use the
XDS software to submit the job. The job ticket information
included with the PDL file may conflict with the job ticket
information programmed in XDS. Use another submission
method to print the document.
You must satisfy the following prerequisites before you use the
XDS software:
•
Make sure that the Microsoft Windows, Sun Solaris, or
Macintosh software is installed on your workstation. If the
software is installed as a shared copy on your network server,
contact your system administrator.
•
Know how to use the tools in Windows, Solaris, or Macintosh
to connect to the network disk drives or to disconnect from
the drives to which you are currently connected.
•
Make sure that the XDS Plus software is installed on your
workstation. Refer to the "Installation Guide" for the
procedures.
2-1
Advertisement
Table of Contents
