Table of Contents
Advertisement
Guide to Printing Using Xerox Production Print Services
Job tickets
"a-z" "A-Z" "0-9" "-" "_" "." "!" "~" "*" "'" "(" ")"
The following sections discuss the parameters and print
instructions that you can specify from the Job Submission
window.
A job ticket is a set of specified printing options that the system
will use for a job. On the Job Submission window, you can
specify a wide range of parameters for the job that you are
printing. The information in the job ticket accompanies the job to
the printer and gives the printer instructions on how to print the
job.
When you submit a job, you can specify its parameters by one of
the following methods:
•
Specify all desired parameters that are available on the Job
Submission window. These settings apply to the current job
only and are not saved as a job ticket file.
•
Select the default job ticket that is on your workstation. You
can modify and save this job ticket from the Job Submission
window if desired.
•
Select the queue default job ticket that was specified on your
printer controller.
Specifying job ticket parameters for the current job
You can create a new ticket for a job at the time you are sending
the job to print, by selecting or entering options in the fields on
the Job Submission window. You cannot save or restore this job
ticket unless you save it as your default job ticket, replacing the
existing one. Refer to "Modifying the default job ticket," later in
this chapter, for the procedure.
Follow these steps to create a job ticket for the current job:
1. Select a printer queue.
2. Enter all desired specifications in the fields on the Job
Submission window. Refer to the following sections for
explanations of these fields. Use the slider button at the right
of the window to scroll to access all the available fields.
3. When you have completed specifying the desired parameters
for your job, do one or both of the following.
Printing a job using the DocuSP web interface
4-3
Advertisement
Table of Contents
