Xds Plus Printing Process - Xerox 701P40016 Print Manual

Using the XDS Plus software

XDS Plus printing process

3-4
Guide to Printing Using Xerox Production Print Services
1. Open the XDS Plus window.
Refer to "Accessing the XDS Plus software," in the previous
section.
2. Select a print queue.
Refer to "Selecting a printer and queue."
3. On the Files tab window, perform the following:
a. Select a document file to print.
Refer to "Selecting a file to print."
b. Select a job ticket file, if you do not intend to create a new
ticket for this job.
c. Select the job destination (print, save, or print and save).
Refer to "Selecting printing or saving."
4. Set up the print job and job ticket parameters as required.
Select the following tabs to access and set up the various job
parameters:
• Job Setup
• Output
• Image Adjustment
• Color
• Special Pages
Refer to "Setting up a print job."
5. If desired, record job notes by entering them on the Job
Notes tab window.
6. Send the document file to the print queue.
Refer to "Submitting a print job."
NOTE: When you are performing the setup procedures, you can
use <Tab> to move the cursor to the next button or text box in
every window. Holding down <Shift> while pressing <Tab>
causes the cursor to move backward through the items on the
window.