Table of Contents
Advertisement
Using the XDS Plus software
Accessing the XDS Plus software
Accessing XDS Plus from Windows
Accessing XDS Plus from Solaris
3-2
Guide to Printing Using Xerox Production Print Services
The XDS Plus window gives you access to all job setup, printing,
and job management tasks that you can perform on your
Windows or Solaris or Macintosh client. You can access the XDS
Plus software either from files on your workstation, or over the
Internet using the XDS Plus Job Submission Applet.
For the procedure for printing a document using XDS Plus, refer
to "Printing a document," later in this chapter.
NOTE: The XDS Plus Applet does not run on Internet Explorer
5.0 for Solaris. To run XDS Plus Applet on Solaris, you must use
Netscape 6.2.1 for Solaris.
NOTE: Netscape is not supported on Windows applications
Follow these steps to open XDS Plus from Windows:
1. Log on to your network.
2. From your workstation Start menu, select the following
options in the order shown below.
a. [Programs]
b. [Xerox Applications]
c. [XDS Plus Tool Suite <version>]
d. [XDS Plus]
e. [XDS Plus]
Follow these steps to open XDS Plus from Solaris:
1. Log on to your network.
2. Using File Manager, double-click the [XDS Plus] application
icon, located in the following directory:
/<your home directory>/Xerox_Applications/
XDS_Plus_Tool_Suite_<version>/XDS_Plus/XDS_Plus
3. On the Action: Run window that opens, select [OK]. A Run
window opens.
Advertisement
Table of Contents
