Installing And Using The Network Scanner Utility; Before Installing The Network Scanner Utility; Installing The Network Scanner Utility; Uninstalling The Network Scanner Utility - Xerox WORKCENTRE 7428 System Administrator Manual

Scanning and Faxing

Installing and Using the Network Scanner Utility

To retrieve scanned documents directly from a folder into an image-editing application such as
Adobe® Photoshop®, you need to install the Network Scanner Utility (scan driver) on your computer.
You can additionally install and use Network Scanner Utility 3 to view and import scanned files,
without using a client-side image-editing program. For Network Scanner Utility 3 installation
instructions, refer to instructions contained on the Driver/Network Utility CD ROM that came with the
printer.

Before Installing the Network Scanner Utility

Before installing the Network Scanner Utility, make sure that your computer meets the following
requirements:
• You must be running Windows XP or Windows 2000. Windows 2000 Server/Advanced Server
Terminal Service is not compatible with this feature.
• Your computer must be operating with a i486DX4/100 MHz processor or faster, have 32 MB RAM
or greater, and have 40 MB or more of free hard drive space (not including space for storing
scanned data).
• Your computer must be connected to a network using the TCP/IP protocol.
• Your image-editing application must be compatible with the TWAIN interface to import scanned
data.

Installing the Network Scanner Utility

1. Insert the Driver/Network Utility (Windows) CD ROM into your computer's CD drive.
2. Open Windows Explorer, click the drive letter for your CD ROM drive, and open Drivers\Scan\Disk1.
3. Double click Setup.exe and follow the instructions displayed on screen.

Uninstalling the Network Scanner Utility

1. From the Windows 2000 desktop, from the Start menu, select Settings, Control Panel, then double
click Add/Remove Programs. On the Windows XP desktop, click Start, Control Panel, then double
click Add/Remove Programs.
2. Select Fuji Xerox Network Scanner Utility, then click Add Remove.
3. Click Yes.

Importing Scanned Data from the Folder to an Image-Editing Application

1. Start a TWAIN-compatible application program, such as Photoshop.
2. From the File menu, select the command for selecting the scan source (Import/Twain Source, in
Photoshop).
3. Select FX Network Scan from the displayed list and click Select.
138 WorkCentre 7425/7428/7435
System Administrator Guide