Xerox WORKCENTRE 7428 System Administrator Manual page 67

LDAP Group Access
LDAP server user groups can be used to control access to the printer. For example, the LDAP server may
contain a group of users called Admin. You can configure the Admin group on the printer so that the
members of that group will have administrator access to the printer. When a user logs in at the printer
with their network authentication account, the printer performs an LDAP look-up to determine if the
user is a member of any groups. If the LDAP server confirms that the user is a member of the Admin
group, the user will have administrator access.
The following groups are available:
• Color Access Group
• System Administrator Access Group
• Account Administrator Authorization Group
In one of the group access boxes, enter a name for the group. Repeat for other group access boxes.
Note: Entries should be in base DN format (for instance, cn=Admin, ou=people, dc=xerox, dc=com).
Configuring Network Authentication (by a Remote Accounting server)
Network authentication uses the user information managed on a remote Accounting server to manage
authentication (access) to available machine services.
Enable Network Authentication
To enable Network Authentication for use with this printer, at your networked computer, perform the
following steps:
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. If prompted, enter the system administrator user name and password (default: admin, 1111).
4. Select the Security folder, then the Authentication Configuration.
5. Select Login to Remote Accounts from the Login Type drop down list.
6. Select the Print Stored File from Folder, or Folder to PC/Server Enabled check boxes to enable
these services.
7. Select the Non-account Print Enabled check box if you want to enable printing for people without
accounts.
8. Click Apply, then click Reboot Machine.
9. Refresh your browser, click the Accounting folder, then Accounting Configuration.
10. Select Network Accounting from the Accounting Type drop down list.
11. From the Verify User Details drop down menu, select either Yes or No (keep logon records). The
Yes selection will verify user information. When No (keep logon records) is selected, User ID and
Account ID must be entered at the printer, but user information will not be checked. A logon record
will be kept by the printer, however.
12. Click Apply, then click Reboot Machine.
Authentication
WorkCentre 7425/7428/7435
System Administrator Guide
67