Xerox WORKCENTRE 7428 System Administrator Manual page 38

Workcentre 7400 series
Hide thumbs Also See for WORKCENTRE 7428:
Table of Contents

Advertisement

Administrative Tools
7. Click Apply when done.
Note:
Changes to settings are not applied until you restart the printer. A Reboot Machine button is
available on the Status Tab of CentreWare Internet Services.
Configure EtherTalk (AppleTalk)
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Connectivity folder, then the Protocols file folder.
5. Select EtherTalk in the directory tree.
If EtherTalk is not displayed in the Properties Tab directory tree, click the Port Settings in the
Note:
directory tree. Use your mouse to place a check mark in the check box on the EtherTalk line. Click the
Apply button.
6. The available selections include:
Printer Name
Zone Name
7. Enter the name that you wish to assign to this printer. This is the name that will appear in the
Chooser.
8. Either accept the default zone of * which lets the closest router assign the printer to a zone, or
assign the printer to a zone (with a 32 character naming limit).
9. Click the Apply button to accept changes, or Undo to return settings to their previous values.
Note:
Changes to settings are not applied until you restart the printer. A Reboot Machine button is
available on the Status Tab of CentreWare Internet Services.
E-mail, SMTP, and POP3 Settings
You can change E-mail, SMTP, and POP3 settings in CentreWare Internet Services. For complete
information on required E-mail settings, see
Bonjour (if available)
Bonjour (also called Zero-Configuration Networking) allows devices to communicate using 169.254/16
IPv4 addressing, over the same physical or logical (such as in ad hoc, or isolated (non- DHCP)
networks).
When the Bonjour protocol is enabled on ALL communicating devices, and those devices are
connected, Host names of the individual devices will be resolved to IPv4 addressing, without the use of
a DNS server, and IP communications can then take place.
38
WorkCentre 7425/7428/7435
System Administrator Guide
Scan to E-mail
on page 100.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 7435Workcentre 7428Workcentre 7425

Table of Contents