Xerox WORKCENTRE 7428 System Administrator Manual page 17

5. On the report, verify that IPP is enabled. If it is not, enable it. See
6. Verify that IPP is using DNS to resolve Host Names to IP Addresses in support of IPP printing. Enter
your printer's IP address into your Web browser's address field to access
CentreWare Internet Services. Click the Properties tab. Click the Connectivity folder, then on the
Protocols folder and select IPP. Verify that the DNS Enablement check box is selected.
Verify that TCP/IP is Installed in the Computer
1. On the Windows 2000 Desktop, right click the My Network Places icon and select Properties. Right
click the Local Area Connection icon and select Properties.
On the Windows XP desktop, click Start, Control Panel, and double click Network Connections.
2. Right click the Local Area Connection icon and select Properties.
3. Verify that the Internet Protocol (TCP/IP) has been loaded. If it has, click this item and click the
Properties button to verify that this computer is using either a dynamic or static method to obtain
a valid TCP/IP address.
4. If the TCP/IP protocol is not loaded, click the Install... button, then select Protocol as the type of
network component that you wish to install. Click the Add... button and select Internet Protocol
(TCP/IP).
5. With your Operating System Installer Disk readily available, click Have Disk... and follow any
remaining instructions.
6. Once the protocol has been installed, you can click the item and click the Properties button to verify
or set up the method being used for TCP/IP addressing.
Add the Printer to the Windows Desktop
1. On the desktop, from the Start menu, select Printers and Faxes. The Vista path is Start\Control
Panel\Printer(s).
2. On Windows XP, from Printer Tasks, select Add a printer.
3. When the Add Printer Wizard displays, click Next.
4. Select Network Printer and click Next.
5. To create an IPP printer select Connect to a printer on the Internet....
6. Type http:// followed by the printer's fully qualified Domain name or IP address in the URL field.
You may have to type /ipp after the printer's name or ip address. the printer's name can be either
the Internet Host Name or the SMB Host Name as shown on the printer's Configuration Report,
depending on the name resolution used by your network (DNS or WINS).
7. Click Next.
8. When prompted for the driver files, select Have Disk and browse to the location of your print driver.
9. Select the .INF file then click Open.
10. When the Install from Disk screen displays, verify the path and file name are correct and click OK.
11. Select the model that corresponds to your printer and click Next.
12. Enter a name for your printer and select either Yes or No for making this printer your default
Windows printer. Select Yes if you will be printing primarily to this printer from your Windows
applications. Click Next.
13. Select Yes to print a test page. Click Next.
14. Click Finish.
Print Driver Installation
IPP Configuration on page 54.
WorkCentre 7425/7428/7435
System Administrator Guide
17