Xerox WORKCENTRE 7428 System Administrator Manual page 32

Administrative Tools
9. Determine the method to use to supply the DNS Server IP Addresses (to resolve Host Names with
IP Addresses).
10. Determine whether or not Dynamic DNS should be enabled.
11. Click Apply, then click Reboot Machine.
TCP/IP Configuration Selection List
As displayed on your screen, the following selections are available for TCP/IP Configuration.
• IP Mode: Select the IP Mode that applies to your network environment.
• General
• Host Name: The default entry assures a name that is unique to this device on the network.
IP Address Resolution: Use this drop down menu to select the method to use to assign IP
•
Addresses. Select Static, DHCP, RARP, BOOTP, or DHCP/Autonet. Note that with the Autonet
option selected, if a Windows 2000 client can't contact the DHCP server, it will assign itself an
IP address from the 169.254.0.0 class B address space. This is also known as zero configuration,
or Bonjour, networking. Make sure to check the Enabled box for Self Assigned Address at the
bottom of your screen.
• IP Address: To be filled in manually only when Static addressing is selected.
• Subnet Mask: To be filled in manually only when Static addressing is selected.
Gateway Address: To be filled in manually only when Static addressing is selected.
•
Domain Name: Enter the fully qualified domain name here. For example: xerox.com.
•
DNS Configuration
•
• DNS Server Address Resolution: If enabled with a check mark, the printer will contact the
DHCP Server for the IP Addresses of up to three DNS Servers. If unchecked, this information
must be entered manually.
• Three DNS Address boxes are supplied for the manual entry of DNS Server addresses.
• Dynamic DNS Update: If your DNS Server does not support dynamic IP address updates there
is no need to enable this check box. Check the Overwrite box to enable DNS information
overwriting.
• Generate Domain Search List Automatically: A check box is provided for enabling automatic
Domain searches.
• Domain Names 1,2,3: Three text boxes are provided for the entry of Domains to search (for
example, Xerox.com).
Connection Timeout: An entry box is provided for entering a Timeout for searches of Domains.
•
• Zero Configuration Networking: Used with DHCP/Autonet selected from the IP Address
Resolution drop down menu, when this box is checked the printer will assign itself an IP address
from the 169.254.0.0 class B address space.
Note: Changes to TCP/IP settings will not be applied until you restart (reboot) the printer.
32 WorkCentre 7425/7428/7435
System Administrator Guide